AirLive WHA-5500CPE - Manual (Page 37)

4. Web Management-Wireless and WAN Settings
AirLive WHA-5500CPE User’s Manual 30
„ Device Status: This section for monitoring the status of WHA-5500CPE. It
provides information on device status, Ethernet status, wireless status, wireless
client table, and system log.
„ Logout: Please make sure to Logout after you finish all settings.
„ Language Bar: You can change the web interface to some other languages by
the pull down menu.
4.2 Operation Modes (Wireless and WAN Settings)
The wireless settings of WHA-5500CPE are dependant on the wireless operation mode you
choose. Therefore, the first step is to choose the operation mode. For explanation on
when to use what operation mode, please refer to Chapter 1.
When you select “Wireless Settings” in the welcome screen, or click on the “Operation
Mode” on the top menu; the following screen will appear:
„ Mode: The available wireless operation modes for WHA-5500CPE. Select one
and click on “Change Mode” button to switch between modes..
„ Setup: Click here to configure the Wireless and WAN(in router mode) settings.
„ Radio: This explain how the radio function in the particular operation mode
„ Ethernet: This shows whether the radio
This tells you
what is the
Current
Configure Wireless and WAN
After you select the
new operation
mode click here to
Select one of
the wireless
operation