AirLive WHA-5500CPE - Manual (Page 32)

3. Configuring the WHA-5500CPE
25 AirLive WHA-5500CPE User’s Manual
Follow the example below to change to “Client Infrastructure” mode
1. Select “Client Infrastructure” mode.
2. Click on “change mode” button
3. The AP will reboot, wait for about one minute
3.5.2 Change the Device’s IP Address
The default IP address is at 192.168.1.1. You should change it to the same subnet as
your network. Also, if you want to manage WHA-5500CPE remotely, you have to set the
Gateway and DNS server information.
To setup the IP settings for WHA-5500CPE, please select “System Configuration” ->
Device IP Settings”. After entering the IP information, click on “Apply” to finish.
2
1