AirLive WHA-5500CPE - Manual (Page 24)

3. Configuring the WHA-5500CPE
17 AirLive WHA-5500CPE User’s Manual
3.2 Prepare your PC
The WHA-5500CPE can be managed remotely by a PC through either the wired or wireless
network. The default IP address of the WHA-5500CPE is 192.168.1.1 with a subnet mask
of 255.255.255.0. This means the IP address of the PC should be in the range of
192.168.1.2 to 192.168.1.254.
To prepare your PC for management with the WHA-5500CPE, please do the following:
1. Connect your PC directly to the LAN port on the DC Injector of WHA-5500CPE
2. Set your PC’s IP address manually to 192.168.1.100 (or other address in the same
subnet)
You are ready now to configure the WHA-5500CPE using your PC.
3.3 Management Interface
The WHA-5500CPE can be configured using one the management interfaces below:
Web Management (HTTP): You can manage your WHA-5500CPE by simply typing
its IP address in the web browser. Most functions of WHA-5500CPE can be accessed
by web management interface. We recommend using this interface for initial
configurations. To begin, simply enter WHA-5500CPE’s IP address (default is
192.168.1.1) on the web browser. The default username and password are both
“airlive”.