AirLive WHA-5500CPE - Manual (Page 79)

5. Web Management2: System Configuration, Tools and Status
AirLive WHA-5500CPE User’s Manual 72
5.1.6 Firmware Upgrade
System Configuration -> Firmware Upgrade
can upgrade the firmware of your WHA-5500CPE (the software that controls your
WHA-5500CPE’s operation). Normally, this is done when a new version of firmware offers
new features that you want, or solves problems that you have encountered with the current
version.
„ Upgrade Firmware:
To update the WHA-5500CPE firmware, first download the firmware from AirLive web
site to your local disk, and then from the above screen enter the path and filename of
the firmware file (or click Browse to locate the firmware file). Next, Click the Upgrade
button to start.
The new firmware will be loaded to your WHA-5500CPE. After a message appears
telling you that the operation is completed, you need to reset the system to have the
new firmware take effect.
Do not power off the device while upgrading the firmware.
It is recommended that you do not upgrade your WHA-5500CPE
unless the new firmware has new features you need or if it has a fix to
a problem that you’ve encountered.
5.1.7 Configuration Save and Restore
System Configuration -> Configuration Save and Restore
You can save system configuration settings to a file, and later download it back to the
WHA-5500CPE by following the steps.
Step 1 Select Configuration Save and Restore from the System Configurations menu.