AirLive WHA-5500CPE - Manual (Page 70)

4. Web Management-Wireless and WAN Settings
63 AirLive WHA-5500CPE User’s Manual
„ Dynamic Routing:
Select the routing protocol scheme used for the router’s LAN / WAN port.
„ Static Routing:
This allows you to manually configure static network routes. Static routes will override
routes learned by standard routing protocol discover methods.
„ IP Routing Table:
To delete a static route from the table, select the route and click DELETE SELECTED.
Note: Changes to the routing table will take effect immediately.
4.4.7 DHCP Server
Operation Mode -> Setup -> IP Routing Settings
DHCP Server Settings is to assign private IP address to the devices in your local area
network (LAN). The default LAN IP address of WHA-5500CPE is 192.168.1.1, changing
WHA-5500CPE’s IP address will also change the DHCP server’s IP subnet.
You can also lock IP address to MAC address manually; the DHCP server will keep the IP
for the MAC address.
Manually assign
MAC address to
IP here
Change IP range
and IP Lease
Time here