AirLive WHA-5500CPE - Manual (Page 62)

4. Web Management-Wireless and WAN Settings
55 AirLive WHA-5500CPE User’s Manual
‰ Step 1 to 3: From Operation Mode menu, select “Setup” -> “Bandwidth Control”
‰ Step 4 to 7: Enable the Bandwidth Control and select the “Total Bandwidth
Control”. Then enter the “2048” for Total Downlink Speed and “512”kbps for
Total Uplink Speed. Click “Apply” to finish
„ Example 2: Per User Bandwidth Control
In this example, the WHA-5500CPE is Access Point mode. There is a wireless client
connecting to WHA-5500CPE with MAC address of 00:04:6F:11:11:11. We want to
limit the bandwidth of the wireless client to 1024 downstream and 512K upstream
using WHA-5500CPE’s Per-User Bandwidth Control.
4
5
7
6
1
2
3