AirLive WHA-5500CPE - Manual (Page 59)

4. Web Management-Wireless and WAN Settings
AirLive WHA-5500CPE User’s Manual 52
To Enable RADIUS Server:
„ Server IP: The IP address of the RADIUS server.
„ Port Number: The port number that your RADIUS server uses for authentication. The
default setting is 1812.
„ RADIUS Type: RADIUS
„ Shared Secret: This is used by your RADIUS server in the Shared Secret field in
RADIUS protocol messages. The shared secret configured in the WHA-5500CPE must
match the shared secret configured in the RADIUS server. The shared secret can
contain up to 64 alphanumeric characters.
„ RADIUS Server Reattempt Period: The number of times the WHA-5500CPE should
attempt to contact the primary server before giving up
4.2.18 Bandwidth Control
Operation Mode -> Setup -> Bandwidth Control
Bandwidth Control can limit the maximum speed of entire wireless interface or individual
device. It is also known as Traffic Shaping. The WHA-5500CPE provides both Total
Bandwidth and Per-User Bandwidth Control for both uplink and downlink speed. It
controls the speed of both wireless and wired interface.