AirLive WHA-5500CPE - Manual (Page 93)

6. Command Line Interface
AirLive WHA-5500CPE User’s Manual 86
„
show wireless security
‰ Purpose: Show current wireless security policy
‰ Example:
Command> show wireless security
Radio1 security policy: none
„
show settings
‰ Purpose: Show LAN or WAN port IP settings
‰ Example:
Command> show lan settings
Lan ip type : static
Lan ip address : 192.168.1.1
Lan ip netmask : 255.255.255.0
Lan ip gateway : 192.168.1.254
Lan ip dnsserv : 0.0.0.0
show firmware version
show vlan ssid list
show wds settings
show advanced wireless
show syslogd
„
show ratemode
‰ Purpose: Show whether the AirMax is using 5MHz, 10MHz, or 20MHz
channel width
‰ Example:
Command> show ratemode
Ratemode is Full(20Mhz);
„
show noise immunity
‰ Purpose: Show the noise immunity setting
‰ Example:
Command> show noise immunity
Noise immunity is enable