Users – 2N StarGate/BlueTower v5.3 User Manual
Page 95
95
Caution
The count of user accounts is file-licensed. Refer to
for the current GSM gateway
Management–>Licence key
licence details.
Users
This section helps you manage the SMS users. Select a communication protocol for
user adding (SMTP/POP3 or SMPP).
Add user
User group –
assign the user to a User group.
User full name –
define the system user name.
Replace dial for outgoing SMS –
define the number (CPN) to which the user's
outgoing SMS messages shall be sent.
Access type –
select the communication protocol for SMS processing:
Login name (without domain) – define the login name for the client Email.
Email (SMTP/POP3)
– use SMTP for SMS sending and POP3 for SMS
receiving.
SMPP (SMSC)
– set the GSM gateway into the 'SMS centre' mode.
SMPP (ESME) – set the GSM gateway into the 'ESME - External Short
Messaging Entity' mode.
System ID –
SMSC user
ID.
Password –
SMSC/SMTP user password.
System ID (for authentication on remote side) –
ESME user ID.
Password (for authentication on remote side) –
ESME user ID.
set the TCP parameter into the client/server mode.
TCP type –
Server address –
set the server IP address and
TCP server transport port.
Message direction of Esme – set the ESME user details:
Transceiver –
ESME works as a transmistter/receiver.
Transmitter
–
ESME works as a transmitter.
Receiver
–
ESME works as a receiver.
Address range
–
set this parameter if required so by SMSC for SMS
receiving.