Echo 72854s - Manual (Page 8)

4
S E C T I O N 1
12173
12174
12183
Used on 25 and 28 HP Models:
Panel 1 - Attention
Panel 2 - Read and become familiar with the Owner's
manual before operating this machine.
Panel 3 - Wear proper eye and ear protection while
operating this machine.
Panel 4 -Stop machine and allow all parts to come to a
complete stop before cleaning, making
adjustments or servicing machine.
Panel 5 and 6 - Stop engine and remove spark plug wire
or key before cleaning, making adjustments or
servicing machine.
1 2
3 4
5 6
Used on All Models: Keep away from discharge
opening while machine is operating. Point discharge
away from bystanders or anything that could be damaged
by flying debris.
Used on all Models: Keep hands and other body parts
from rotating parts. Replace shields before operating
machine.
Used on 25 and 28 HP Models: Press clutch pedal
down with foot to disengage clutch while starting engine.
Slowly release foot to engage chipper clutch after engine
is running.
12172
12250
Used on All Models: Check chipper blade, anvil and
feed roller bolt for proper torque after every 10 hours of
operation. Refer to Owner's Manual for instructions.
Used on All Models: Keep hands and feet out of inlet
and discharge openings while machine is operating to
avoid serious injury.
12175
1.2 Safety Decals
Safety and instruction decals are located on the chipper frame and engine. Replace any decal that is damaged or unreadable.
Call dealer for information on decals in Spanish, French, or other languages.
NOTE: For engine safety and instruction decals, see engine owner's manual or contact the engine manufacturer.