Insert – Echo 72854s User Manual
Page 4
Crary Bear Cat Insert
Insert
PRODUCT: BearCat 8" Chippers
SUBJECT: Safety Bar
Rev 030205
The feed chute has an extension tray that extends out 29
inches. Around the edge of the tray is an orange comtrol
arm that will contact a safety switch when depressed. The
safety switch will close the solenoid valve, stopping the
hydraulic flow to the feed roller drum. The chipper will not
feed material until the reset button on the top of the feed
chute is pressed.
The switch box has a red light that will indicate the switch
has been triggered and will not go out until the reset button
has been reset. The reset button will release the solenoid
valve allowing the hydrauylic fluid to the feed roller drum.
fEED ChUTE
EXTENSION TRAY
CONTROL ARM
SAfETY SWITCh
RESET BUTTON