Echo 72854s - Manual (Page 7)

3
S E C T I O N 1
Failure to maintain proper fastening torque (75
ft. lbs.) on bolts for the components listed above
may result in severe damage to the chipper and/
or personal injury!
5. Do not allow processed material to build up in
the discharge area; this may prevent proper
discharge and can result in kickback of material
through the feed opening.
6. Do not attempt to operate the chipper with any of
the guards, deflectors, or shrouds removed. Keep
away from moving parts.
7. Keep all guards, deflectors, and shrouds in good
working condition.
8. Always stand clear of the discharge area when
operating this machine.
9. Keep your face and body away from the feed
opening.
10. Do not overreach. Keep proper balance and
footing at all times.
11. Do not transport or move machine while the
machine is running.
12. If the machine becomes clogged, shut off engine
(or disengage PTO). Allow machine to come to a
complete stop before clearing debris.
Additional Safety Rules for Towing
(Towable Models)
1. Before towing, rotate the discharge tube to face
in the opposite direction of the vehicle that is
towing it. This will prevent the discharge tube
from projecting over the trailer wheels and
striking foreign objects.
2. Always connect hitch safety chains. Make sure
trailer hitch bolts are tight and secure. Do not
attempt to attach the pintle hitch to a ball type
vehicle hitch.
The Standard muffler installed on the
chipper engine does not include a spark
arrestor. If this machine is to be used in an area
where a spark arrestor is required by law, one
will have to be added before use. Contact the
local authorities to see if these laws apply to
you. See your authorized engine dealer for
spark arrestor options.
3. Maximum towing speed should not exceed 55
M.P.H. Inflate tires to manufactures specs. as
stated on the tire sidewall. Check wheel lug bolts
periodically to be sure they are tight and secure.
4. Make sure that the jack stand on trailer is in the
UP position to clear the ground during towing.
Place the jack stand on a level surface and secure
it in the DOWN position before use.
5. Never allow passengers to ride on the infeed
chute while the vehicle is moving (whether the
chipper is running or not).
Additional Safety Rules for PTO Models
Warning: Keep body and clothing away from
PTO shaft when running.
1. Connect 3 pt. hitch pins and snap pins, connect
PTO shaft, and have leg stands solidly on the
ground when in use.
2. Before moving, allow machine to come to a
complete stop. To move unit: shut off PTO, and
lift 3 pt. hitch.
3. Always disengage tractor PTO and shut off
engine before removing guards or shields.
4. Keep hands, feet, and clothing away from all
PTO drive parts. Keep guards and shields in
place at all times while operating.
5. Before starting tractor, always make sure transmis-
sion is in neutral or park and PTO is disengaged.
Warning: This chipper is designed to be used
with tractor PTO's rated at 20 to 60 horse-
power. Using this chipper with PTO's above 60
horsepower may cause belt and machine damage in
overload conditions.
Maintenance and Storage
1. On engine models, make sure that the key is
removed from key switch. Disconnect battery.
On PTO models, disconnect PTO.
2. Store the machine out of the reach of children
and where fuel vapors will not reach an open
flame or spark. For storage periods of three
months or more, drain the fuel and dispose of it
in a safe manner (engine models). Always allow
the machine to cool before storing.