Eppendorf Research pro - Manual (Page 19)

19
During this procedure, the aspirated liquid is dispensed in defined partial steps. As with
"Reverse Pipetting", slightly more liquid is aspirated than is necessary for the sum of the
dispensing steps.
The use of filter tips is not particularly recommended! If Filtertips are used, please observe the
volume restriction (Sec. 5.11).
Programming
Procedure
If PROG appears in
the display:
Press the
key briefly.
Select "DIS" for dispensing
(multi-dispensing).
Select the volume per
dispensing step (here: 50 µL).
In the right-hand side: max.
dispensing steps per filling of
the pipette tip
(here: 20 steps; 1,000 µL
pipette).
If necessary, minimize the
dispensing steps. The
dispensing steps flash with
Select.
Display and selection of
aspirating speed.
Display and selection of
dispensing speed.
If appears in the display: Press the key briefly.
Aspiration of total amount of
liquid (here: > 600 µL).
Changed procedure as of software version V.1.56!
Activation of the return
stroke.
This is not a dispensing
step!
Dispensing of liquid into the
sampling tube.
5.9 Dispensing (DIS)
Select
Program
Volume
Option Select Option
Speed Select
Speed Select Speed
R R
Free jet
discharge Discharge
to wall
Operation
5 Operation
5
E05_2 Bedienung A5 Seite 19 Dienstag, 19. Dezember 2006 2:07 14