Eppendorf Research pro - Manual (Page 16)

16
Carrying out dispensing/titration
The direction is changed again
using the volume rocker. This
change of direction can be
repeated without restriction.
A defined end volume has
been reached. A special
acoustic signal is emitted.
Dispensing is carried out by
pressing the key again.
Aspirate the defined total
volume by holding down the
Actuate key.
When the key is pressed
briefly:
The amount of liquid
dispensed appears in the
display.
Press key again:
Total of dispensed liquid is
displayed.
Note: We recommend low speed for dispensing. The speed can also be reduced between individual
dispensing steps (see Ch. 5.2, "Speed for aspiration and discharge").
Total amount of liquid is
dispensed. A special acoustic
signal is emitted.
Blow-out is not executed.
Blow-out can be actuated by
pressing the
key.
Press the key again to aspirate
liquid.
The direction can also be
changed after partial
dispensing. The volume
display changes after the
Actuate key has been pressed.
No additional projection of the
volume occurs following the
repetition of the procedure.
The display starts at 0.
Volume
or
R
Note:
Volume
5 Operation
Operation
5
E05_1 Bedienung A5 Seite 16 Dienstag, 19. Dezember 2006 2:05 14