Eppendorf BioPhotometer plus - Manual (Page 31)

31
6 Parameter and functions
BioPhotometer plus — Operating manual
6.2 Functions
1. In the method selection press the key function/·/No..
A list of general device functions will open. In the method procedure or parameter mode this
key has a different function (entering the sample number or entering a decimal point when
inputting values).
2. In this function list and any sub-lists (e.g. results list) select the desired function like in the
parameter list (see View, change and store the parameters of a method on page 26) using the
cursor keys and open it with the Enter key.
3. Press the function/·/No. key again to return from a sublevel of the functions (e.g. opening
stored results in the function "RESULTS") to the next higher level in the function list and finally
back to the method selection.
Tab. 2: Summary and description of functions
Function Explanation
RESULTS Display of the last 100 results (the result measured last is shown first).
For results with information about more than one device display (detailed information
for nucleic acids and "dye methods") you can access the detailed displays via the
cursor keys.
Print the selected result using the Enter key.
STANDARDS Display of the stored calibration data for methods with evaluation via standards.
In this list you can also scroll using the cursor keys until you see the calibration data of
the desired method in the device display.
PRECISION MEASUREMENT Measurement and precision calculation of 10 consecutive measured values of a
sample. The method program of the last opened method is used.
PHOTOMETER TEST
NEW MEASUREMENT
LAST MEASUREMENT Checking the photometer using a filter kit from Eppendorf (see Check photometer on
page 34).
You can start a new check (NEW MEASUREMENT) or open the results of the last
check (LAST MEASUREMENT).
SPRACHE DEUTSCH
LANGUAGE ENGLISH
LANGUAGE U.S.ENGL
LANGUE FRANCAISE Selection of the language version.
"ENGLISH" and "U.S.ENGLISH" differ in their date format.
DATE Date input. Save using Enter.
Time Time input. Save using Enter.
Printer Printer selection:
• DPU 414: Connection of the Eppendorf thermal printer.
• SERIAL: Connection of a different printer. In this case certain printer requirements
must be met. Contact your Eppendorf partner for details.
SERVICE The function is only available to Eppendorf Service.
EN
O
perating manual