Eppendorf BioPhotometer plus - Manual (Page 25)

25
5 Operation
BioPhotometer plus — Operating manual
The dilution is retained for calculating all subsequent sample results until it is overwritten. To
delete the dilution enter "0" for both "SAMPLE" and "DILUENT" or delete the values using the
keys clear and enter.
5.11 Sample number
The device display for measuring results contains the sample number at the top right. It is
counted separately continuously for every method and reset to "1" when a new method is
opened.
You can modify the sample number before a measurement.
For the following example 5 samples were already measured:
3. Start a sample measurement using the sample key.
4. The result is calculated taking into account the sample
dilution entered.
1. Open the sample number input using the
function/·/No. key.
2. Enter the desired sample number for the next sample
(here "3") and confirm the entry with Enter.
This brings you back to the measuring procedure and
you can start a sample measurement.
3. Start a sample measurement using the sample key.
4. The sample result is allocated the sample number "3".
All other samples are incremented continuously.
EN
O
perating manual