Eppendorf FemtoJet express - Manual (Page 51)

99
Command to read out
parameters
[C]
Code
[xxx]
Significance of
output parameter
[A]
Output parameter
[rrrrrrrrrr]
Query program version 101 Versions number x.xx
Query bleeper 150 Status:
0 = off / 1 = on 0 or 1
Query pressure unit 151 Unit:
0 = hPa / 1 = psi 0 or 1
Query injection time t
i
152 Injection time
in 1/10 seconds
1 – 999
Query compensation pressure p
c
153 Pressure in hPa /psi 0 – 6,000 / 87
Query injection pressure p
i
154 Pressure in hPa /psi 0 – 6,000 / 87
Query background illumination 155 Status:
0 = off / 1 = on 0 or 1
Error no. for incorrect
operating construction
ERR = [eee] Cause Solution
060 The first character is not
a c or C. Check entry parameters.
Change entry.
061 The 2nd to 4th character
is not a digit. Check entry parameters.
Change entry.
062 The 5th character is not =. Check entry parameters.
Change entry.
063 The parameter is not within
the permitted range. Check entry parameters.
Change entry.
064 The command is not known. Check entry parameters.
Change entry.
Appendix A
9 Appendix A
9
09_AnhangA_en.fm Seite 99 Freitag, 29. Juni 2007 2:52 14