Eppendorf FemtoJet express - Manual (Page 11)

59
Variable regulator
In the normal operating mode, the parameters for injection are set by the three variable
regulators. The arrangement of the variable regulators corresponds to the arrangement of the
parameters in the two bottom lines of the display:
From left to right: injection pressure pi, injection time ti and compensation pressure p
c
.
In other operating modes, the variable regulators have either the significance indicated in the
display or no significance at all.
Tube connection
The injection tube for the capillary holder is connected to the device via the bayonet connec-
tion.
Device description
2 Device description
2
02_Geraetebeschr_en.fm Seite 59 Freitag, 29. Juni 2007 2:49 14