Eppendorf FemtoJet express - Manual (Page 16)

64
Clean
The maximum available pressure for cleaning is applied
at the tube outlet for as long as the key is held down.
Once the key is released, the pressure drops to
compensation pressure p
c
again. The pressure curve is
shown in the form of a bar.
Auto / Manu
To switch between manual and automatic,
time-controlled injection.
In the case of manual injection, time is counted upwards
from 0.0 seconds. The parameter t
i
is not displayed in the
bottom two lines in order to emphasize that the time
cannot be set via the variable regulators in this case.
Count
To reset to zero the counter for injections which have
been actuated.
Menu
To switch the device to menu control; selected functions
may be executed.
In the first line, FUNC indicates that the device is in the
function menu and shows which function number is
active.
The second line contains the function description
(e.g. "Select pressure unit").
The third line requests an action (e.g. press the ,
key to change the pressure unit).
Current status: [hPa]
The two bottom lines show information about which
action is assigned to which variable regulator
(e.g. other functions can be selected using left-hand
variable regulator p
i
).
CLEAN n= 0
≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡
_____
Supply pressure 5261
pi[hPa] ti[s] pc[hPa]
150 0.2 50
MANU - INJECT n= 0
0.4 s
Supply pressure 5261
pi[hPa] pc[hPa]
150 50
FUNC 1
Push Inject to select
Pressure Unit
hPa PSI
Turn pi to
select function
Mode of operation
3 Mode of operation
3
03_Bedienung_en.fm Seite 64 Freitag, 29. Juni 2007 2:49 14