Eppendorf FemtoJet 4x v.1 - Manual (Page 48)

Transport, storage and disposal
FemtoJet
® 4i
English (EN)
48
10 Transport, storage and disposal
10.1 Storage
10.2 Decontamination before shipment
If you are shipping the device to the authorized Technical Service for repairs or to your
authorized dealer for disposal please note the following:
10.3 Transport
Carry out the following steps before transport:
1. Pack the Microinjector in the original packaging.
2. Only use the original packaging for transporting the Microinjector.
Air temperature Relative humidity Atmospheric
pressure
In transport
packaging -20 °C – 70 °C 10 % – 80 % 300 hPa – 1060 hPa
Without transport
packaging – – –
WARNING! Risk to health from contaminated device
1. Observe the notes on the decontamination certificate. You find it as a PDF file
on our website (www.eppendorf.com/decontamination).
2. Decontaminate all the parts you would like to dispatch.
3. Include the fully completed decontamination certificate in the package.
Air temperature Rel. humidity Atmospheric pressure
General transport -25 °C – 60 °C 10 % – 95 % 30 kPa - 106 kPa
Air freight -40 °C – 55 °C 10 % – 95 % 30 kPa - 106 kPa