Eppendorf FemtoJet 4x v.1 - Manual (Page 34)

Operation
FemtoJet
® 4i
English (EN)
34
6.14.5 Illumination function – Switching on/off the display illumination
1. Press the menu enter key.
2. Select the Illumination menu.
3. Confirm with the menu enter key.
4. Select the mode.
5. Confirm with the menu enter key.
6.14.6 Continuous flow function – Setting the constant operating pressure
1. Press the menu enter key.
2. Select the Continuous flow menu.
3. Confirm with the menu enter key.
The screen for Continuous flow appears.
4. Set the operating pressure p
w
with the rotary knob.
5. Confirm with the menu enter key.
6.14.7 Drain pressure supply function – Draining the pressure reservoir
1. Press the menu enter key.
2. Select the Drain pressure supply menu.
3. Press the menu enter key.
The venting opens for a short time.
The condensation water is discharged.