Eppendorf FemtoJet 4x v.1 - Manual (Page 37)

Troubleshooting
FemtoJet ® 4i
English (EN)
37
7.2.2 Error 11 – 18
Error #06 • The key pad is faulty.

Switch the device off and
back on again.

If the error persists, please
contact the authorized
service.
Error #07 • System error

Switch the device off and
back on again.

If the error persists, please
contact the authorized
service.
Error #08 • Injection pressure control
signals an unexpected error

Switch the device off and
back on again.

If the error persists, please
contact the authorized
service.
Error #09 • Pressure reservoir control
signals an unexpected error.

Switch the device off and
back on again.

If the error persists, please
contact the authorized
service.
Error #10 • Safety monitor signals an
unexpected error.

Switch the device off and
back on again.

If the error persists, please
contact the authorized
service.
Symptom/message Cause Remedy
Error #11 • Serial interface RS232
signals an unexpected error.

Switch the device off and
back on again.

If the error persists, please
contact the authorized
service.
Error #12 • The voltage control signals
an unexpected error.

Switch the device off and
back on again.

If the error persists, please
contact the authorized
service.
Symptom/message Cause Remedy