Eppendorf FemtoJet 4x v.1 - Manual (Page 38)

Troubleshooting
FemtoJet
® 4i
English (EN)
38
Error #13 • The compressor does not
work or is faulty.

Switch the device off and
back on again.

If the error persists, please
contact the authorized
service.
Error #14 • Pressure control is faulty.

Switch the device off and
back on again.

If the error persists, please
contact the authorized
service.
Error #15 • System error

Switch the device off and
back on again.

If the error persists, please
contact the authorized
service.
Error #16 • System error

Switch the device off and
back on again.

If the error persists, please
contact the authorized
service.
Error #17 • An open injection tube is
connected.

Take off the injection tube.

Connect the injection tube to
the universal capillary
holder.

Connect the injection tube.

Switch the device off and
back on again.

If the error persists, please
contact the authorized
service.
Error #18 • An open injection tube is
connected.

Take off the injection tube.

Connect the injection tube to
the universal capillary
holder.

Connect the injection tube.

Switch the device off and
back on again.

If the error persists, please
contact the authorized
service.
Symptom/message Cause Remedy