Eppendorf FemtoJet 4x v.1 - Manual (Page 20)

Installation
FemtoJet
® 4i
English (EN)
20
4 Installation
4.1 Preparing installation
1. Check the packaging for damage.
2. Check that everything is included in the delivery.
3. Check the Microinjector and the accessories for damages.
4.1.1 Complaints about damages

Contact your local Eppendorf distribution partner.
4.1.2 Incomplete delivery

Contact your local Eppendorf distribution partner.
4.2 Selecting the location
Please select the location for the Microinjector according to the following criteria:
• Suitable mains/power connection in accordance with the name plate.
• A bench with a horizontal and even work surface which is designed to support the
weight of the Microinjector.
4.3 Connecting the Microinjector
Prerequisites
• Electrical connection data according to the name plate.
• The Microinjector is switched off.

Connect the power cable.
4.4 Connecting an external device
The following devices can be connected to the Microinjector:
• Micromanipulator (InjectMan 4, TransferMan 4r or InjectMan NI 2)
• Computer
Store the packaging for later transport or storage.
In case of visible damages on the Microinjector or the packaging, do not
commission the Microinjector.
The mains/power switch and cutting unit of the mains/power line must be easily
accessible during operation (e.g., residual current circuit breaker).