Snorkel TB100J User Manual

Page 87

INDEX

I - 4

P/N 0112478

Qualified operator, daily inspection and maintenance, 10-1
Qualified trained maintenance personnel, iii

Radiator cap, removing, 1-3
Reach, platform, 3-1
Rear axles, extend and lock, 7-9 to 7-11
Rear axles, retract and lock, 7-11 to 7-14
Rear end, nomenclature, 3-5
Regulations, local, 1-1
Retract and lock, rear axles, 7-11 to 7-14
Right side, nomenclature, 3-5
Running time, 3-2

Safety devices, 2-1 to 2-5
Scaffold Industry Association, Inc., reprints, iv
SELECTOR SWITCH, 6-2 to 6-3
Serial number locations, 3-5
Shut-offs, automatic, 5-1
Signs, caution, iii
Signs, danger, iii
Siren, tilt alarm, 2-1
Slide pads, 10-8
SLIDE ACTUATOR SWITCH, 12-5
SLIDE INTERLOCK button, 12-5
Snorkel
address, iv
approval for special use, 1-2
decals and placards, new, 1-3
engineering department, modifications, iii
fuel cap, 1-3
parts, 1-3
reprints, iv
Specifications, 3-1 to 3-5
Speed
maximum driving, 3-1
how to set, 6-4, 12-4
safe driving, 1-1
wind, 3-1
Spring washers, checking, 10-9
Starting and stopping precautions, 1-3
Starting, from ground-control box, 7-1 to 7-3
Starting, from platform-control box, 7-3 to 7-4
Stations, control, 7-1
Steering, 7-8
STEERING FLOAT VALVE, 12-4
Stopping, emergency, 7-1,
Stowed position, 9-1
Stowing, 9-1
Structural damage, 10-6

Temperature
ambient air, 3-1
engine operating, 3-2
hydraulic oil, 3-1, 4-2
TEMPERATURE, gauge, 4-1
Thunderstorms, 1-2
Tie-downs
chains, 9-3
nylon strap, 9-2, 9-3
rubber straps, 9-3
wire-tie, 9-4
Tilt alarm, 2-1
Tipover hazards, 1-2
Tires, 3-1, 10-5
foam in, emergency handling, 13-1
Tow kit, 12-3
Towing, 9-1, 9-4
Trailering, 9-1 to 9-4
Trained mechanic, iii
Transferring from platform, when and how, 1-2
Transporting, 9-1 to 9-4
Travel speed, 1-3
how to set, 6-4
Troubleshooting, 11-1 to 11-2
Turning radius, 3-1
Turntable, sides and ends, 3-5
TURNTABLE SWING switch, 6-2 to 6-3

WARM-UP switch, 12-2
Warranty, inside back cover
Water, coolant, 10-3
Weight of TB100J, 3-1
Weight on axles, 9-2
Welding, ground for, 1-1
Welds, 10-6
Wheelbase, 3-1
Whiffles, 10-9
Width, of TB100J, 3-1
Wind loading, 1-2
Wind speed, safe 3-1
Wire ropes, checking, 10-9
Wiring harnesses, 10-3
Work place, hazards, 1-1
Work place, inspection, iii, 1-1
Working envelope, 3-4
and EMS lights and audio alarm, 2-4