Snorkel TB100J User Manual
Page 58
9. STOWING & TRANSPORTING
3
9 -
P/N 0112478
7. Attach two nylon straps (5) (6) from the
underside of the base boom (7), as shown, to the
trailer (8).
11
1 0
9
8. Fasten a nylon strap (9) from the underside of
the base boom (7) to the weldment (10) across
the lower end of the jib-boom (11).
NOTE: The nylon strap (9) keeps the jib-
boom from bouncing away from the chassis
during transportation. In extreme cases,
without the strap (9), the platform can be
pushed off the wooden block (1) and into the
end of the trailer or cab.
D A N G E R
A loose TB100J can cause death or serious
injury. Do not attach tie downs to the steering tie
rods. The tie rods are not strong enough to
safely hold a TB100J.
9. Attach chains to the front (12) and back (13)
tie-down lugs. Chocks may be removed at this
time, though it is a good idea to leave them in
place.
14
15
10. Use rubber straps (14), as shown, to keep
the rear cowling doors (15) from opening during
transport.
1 6
1 7
1 8
11. Hook a long rubber strap (16) through the
hole (17) in the inside of one of the front cowling
doors (18).