Snorkel TB100J User Manual

Page 85

INDEX

I - 2

P/N 0112478

(Continued)

Emergency power, checking function, 10-7

EMERGENCY POWER OPERATION

switch, 6-2 to 6-5

and boom speed, 8-3
EMERGENCY STOP switches, 2-2, 6-2 to 6-5
EMS
audio alarm, 2-4
ENVELOPE, checking function, 10-9
ENVELOPE, description, 2-4 to 2-5
lights, 2-3
STATUS, description, 2-4 to 2-5
STATUS, emergency operation, 8-2
WARNING, description, 2-4 to 2-5
WARNING, emergency operation, 8-2
Engine
data, 3-2
oil charts, 3-2
oil, checking, 4-3
oil pressure shut-off, 5-1
temperature shut-off, 5-1
ENGINE THROTTLE switch, 6-2 to 6-5
and battery charging, 10-8
checking air filter, 10-7
Envelope management system,

see EMS

Envelope, working, 3-4
Environmental operating ranges, 3-1
Ether injection, 12-2
Extend and lock, rear axles, 7-9 to 7-11
Extendible axle, controls, 6-1
Extendible axle, interlock, 2-3

Fall arrest, 1-2
Falling hazards, 1-2
Flashing lights, 2-6, 12-6
FILTER MINDER, 4-1, 10-7
Floor grating, visibility, 1-2
Foam in tires, emergency handling, 13-1
Foot switch, 6-4
as safety device, 2-3
with platform-moving switches, 7-6
Four-wheel drive, 12-4
Front end, nomenclature, 3-5
Fuel
as cleaner, 1-3
cap, 1-3
grade, 3-2
handling precautions, 1-3
level, 10-2
tank
capacity, 3-1
filling, 1-3
pressurizing, 1-3
FUEL, gauge, 4-2
FUEL switch (option), 6-2

Gasoline, emergency handling, 13-2,

see fuel

Gate, gravity, 2-2, 10-6
Generator, ac, 12-3
GFCI, 2-6, 5-2
Gradeability, 3-1
Ground
bearing strength, 3-1
clearance, 3-1
fault circuit interrupt, 2-6, 5-2
soft, raising boom, 1-2
speed, how to set, 6-4
GROUND OPERATION switch, 6-2 to 6-3
with platform-moving switches, 7-6
as safety device 2-3
Guardrail, 2-6
climbing, 1-2
Guardrail, gate, 2-2

Height
platform, 3-1
working, 3-1
HIGH RANGE SPEED SELECTOR VALVE, 12-4
Hoist, TB100J, 1-2
Hooks, over-center latches, 12-5
Horn, purpose, 2-5
Horn, tilt alarm, 2-1
HOURS, gauge, 4-1
HRSS VALVE, 12-4
Hydraulic oil
and ac generator, 12-3
emergency handling, 13-2
filter, gauge, 4-3
leaks, 10-4
how to find, 1-3
level, 10-4
temperature, maximum, 6-4
specifications, 3-1
Hydraulic system, cold weather warm-up kit, 12-2
HYDRAULIC OIL level gauge, 4-2
HYDRAULIC OIL temperature gauge, 4-2

Inspection chart, placards and decals, 10-10
Inspection drawing, placards and decals, 10-11
Interlock, axle, 2-3, 6-1, 10-6