Snorkel TB100J User Manual

Page 20

2. SAFETY DEVICES

2 - 6

P/N 0112478

PLATFORM WORK LIGHTS (option)

The platform work lights are located on top the
platform guard rail. Use the lights to improve
visibility when you are working aloft in dimly lit
areas. Do not use the platform work lights to
drive on public thoroughfares.

For more information about platform work lights
see the “OPTIONS” chapter.

DRIVING LIGHTS (option)

Two 30 watt headlights are located on top of
the front cowling, two 25 watt blinking taillights
are on the sides of the rear cowlings. Driving
lights help improve your visibility and help
others see you when you are driving on dimly lit
construction sites. Driving lights are not for
driving on public thoroughfares.

For more information about driving lights see
the “OPTIONS” chapter.

GFCI OUTLET

The GFCI (ground fault circuit interrupt) is the
electrical outlet located under the platform-
control box. The GFCI protects against short
circuits to ground. When there is a short to
ground the GFCI shuts off power at the
electrical outlet.

GUARDRAILS

The guardrails help protect you from falling off
the platform. Be sure the guardrails are
properly installed and that the gate is in place.

FLASHING LIGHTS (option)

The flashing lights alert people that the TB100J
is present. The lights flash at about one flash
per second any time the engine is running.
There is no ON/OFF switch for the flashing
lights.