Snorkel SRT2670 - Manual (Page 79)

Q
Qualified operators
see Introduction - page iii
R
RCD / ELCB Outlet, 11-1
RCD / ELCB Reset, 7-9
Responsibilities of owners and users
see Introduction - page iv
S
Safe Operation, 1-1
Safe working load (main deck), 3-1
Safe working load (roll out deck), 3-1
Safety Decals and Placards, 1-3
Location illustration, 1-4
Safety Devices
Alarms, 2-1
Drive (forward), 2-2
Drive (reverse), 2-2
High temperature, 2-2
Level sensor, 2-2
Low oil pressure, 2-2
Lowering, 2-2
Bubble Level, 2-4
Emergency Stop Switches, 2-1
Flashing Light, 2-5
Guardrails, 2-3
Lanyard Anchor Points, 2-5
Operator Horn, 2-4
Outriggers, 2-4
RCD/ELCB AC Outlet, 2-4
Safety Control, 2-3
Safety Prop, 2-3
Swinging Gate, 2-3
Safety precautions
Fuel Handling Precautions, 1-3
Mounting and Dismounting Precautions, 1-3
Operating Precautions, 1-3
Operator, 1-2
Operator Maintenance Precautions, 1-3
Personnel Precautions, 1-2
Starting and Stopping Precautions, 1-3
Safety prop, 7-9
Signs, Caution, Danger, Notes
see Introduction - page iii
Spark Arrestor, 11-2
Speed (maximum drive), 3-1
Speed (when raised), 3-1
Standard colour, 3-1
Stowing the SRT, 10-1
To Lock the SRT, 10-1
Structural damage and welds, 7-6
Swinging gate, 7-3, 11-2
T
Tipover hazard, 1-2
Tires, 7-5
Towing, 10-4
Transporting the SRT, 10-2
Driving onto trailor, 10-2
Securing to a Transport, 10-3
Trailering, 10-2
Travelling height, 3-1
Troubleshooting, 13-1, 13-2
All systems sluggish, 13-1
Engine will not start, 13-1
Operator Troubleshooting Chart, 13-1
Outriggers, 13-1
Platform drifts down, 13-1
Platform will not drive when raised, 13-2
Platform will not go up, 13-2
SRT will not drive, 13-2
Turning radius (inner), 3-1
Turning radius (outer), 3-1
W
Warranty - Limited
see inside front cover
Weight, 3-1
Winching the SRT, 10-4
Wiring harnesses, 7-4
Work Place Inspection and Practices, 1-1
Working height, 3-1
SRT2670 – 11360A
Index