Snorkel SRT2670 - Manual (Page 43)

The hydraulic oil level should be at the full level. If
necessary, add hydraulic oil at the Hydraulic oil
tank cap. See the “Specifications” chapter 3 for type
and grade of hydraulic oil.
■ Hydraulic oil leaks
Leaking hydraulic oil can cause burns, fires,
falls (slipping), cuts, and puncture wounds (if
under high pressure). Do not tolerate hydraulic
oil leaks. They are dangerous.
Hydraulic oil leaks are easily visible and can show
up anyplace.
Visually inspect the entire machine for hydraulic oil.
Check the ground under the machine for leaked oil.
Check for loose fittings at the valve.
Pay particular attention to the cylinders, check to
see that there is no oil leaking from the seal, also
check all hoses that run to the cylinders.
■ Tires and wheels
SRT tires are foam filled. Punctures of the type
caused by bolts, screws, or nails are not a problem.
Look for large holes or long cuts completely
through the tire body: holes or cuts where foam is
being forced or eroded out of the tire. Also look for
large imbedded objects, such as angle iron, that
can rip a tire body open under some conditions.
SRT2670 – 11360A page 7 - 5
7. Daily Inspection and Maintenance
DANGER