Stowing and transporting, Stowing 10-1, Stowing the srt, 10-1 – Snorkel SRT2670 User Manual

Page 65: To lock the srt, 10-1, Stowing -1

10. Stowing and Transporting

■

Stowing

At the end of each work day (or in preparation for
transporting, pushing, lifting, or storage) a qualified
operator should put the SRT into its stowed position
then lock it.

The correct stowed position is shown here.

To bring the SRT into the Stowed Position use the
controls on either the ground control box (1) or the
platform control box (2) to:

1. Fully lower the platform (3).

2. For models with outriggers:

Use the outrigger controls (4) to
completely raise all four of the outriggers
(5).

3. Close the platform entry gate (6) and

close all the doors on the machine.

To lock an SRT:

1. Push the Emergency Stop switch (7)

down (OFF) and set the Main Power
switch (8) to OFF then remove the key
(9).

2. Turn the Battery switch (10) OFF and

padlock it.

3. (Option - LPG) For machines equipped

with LPG:
Close the valve (11) on the LPG-tank
(completely screwed in).

SRT2670 – 11360A

page 10 - 1