Snorkel SRT2670 - Manual (Page 70)

■ Electrical Outlet
The electrical outlet on the platform, and its power
cable, are designed to supply 2 kW of continuous
duty power to run power tools of various sorts. The
power can come from either the optional ac genera-
tor, discussed elsewhere in this chapter, or from an
electrical source outside the SRT. If you use an
electrical source outside the SRT be sure you dis-
connect it before you drive the SRT away.
■ Swinging Gate
The swinging gate is designed to automatically
close after you enter or leave the platform. It helps
prevent people from falling off the platform.
■ Spark Arrestor
The spark arrestor prevents incandescent carbon
particles from coming out the tail pipe. Baffles in the
spark arrestor slow the flow of particles through the
exhaust system. The additional time spent in the
exhaust system lets the carbon completely burn
before it comes out the tail pipe.
■ Lanyard Anchor Points
There are four anchors on the floor of the platform,
one at the front of the roll-out deck, one at the back
of the platform, and one on each side of the plat-
form.
These anchors are not for lifting or tying down
the machine.
You should attach your fall protection to the
anchors if work rules require it.
page 11 - 2 SRT2670 – 11360A
11. Options