Snorkel SRT2670 - Manual (Page 56)

6. Enter the platform and close the gate (8).
7. Turn the Emergency Stop switch (9)
clockwise and it will pop out (on).
8. If the engine is cold, press and hold the
Choke switch (10) during the next step.
9. Turn and hold the Start switch (11)
clockwise (to the start position) until the
engine starts or for 20 seconds,
whichever comes first. When the engine
starts, release both the start switch (11)
and the choke switch (10).
If the engine does not start in 20 seconds,
release the start switch (11) and release the
Choke switch (10) then wait 60 seconds
before trying to start the engine again.
● Starting a diesel engine
To start a diesel engine from the platform control
box do the following:
1. Set the Battery switch (1) to on.
2. Set the Emergency Stop switch (2) to on
(up).
3. Set the Ground/Platform Selector switch
(3) to platform (up).
4. Turn the key (4) to on — do not turn the
key (4) to start.
page 8 - 6 SRT2670 – 11360A
8. Operation
1
CAUTION