Snorkel SRT2670 - Manual (Page 21)

The RCD (Residual Current Device) is located at
the ground and will protect against short circuits to
earth. When there is a short circuit the RCD will
shut down the 230v AC power to the platform outlet.
To reset the outlet disconnect the power tool lead
from the platform box and reset the RCD at the
ground. If the problem persists call a trained service
technician.
■ Flashing Light (option)
The flashing light alerts people that the SRT is
present and that the SRT is moving. The light
flashes at about one flash per second any time the
SRT engine is running. There is no ON/OFF switch
for the flashing light, it cannot be turned off while
the SRT is running.
■ Lanyard Anchor Points (option)
There are four anchors on the floor of the platform,
one at the front of the roll-out deck, one at the back
of the platform, and one on each side of the plat-
form.
These anchors are not for lifting or tying down
the machine.
You should attach your fall protection to the anchors
if work rules require it.
SRT2670 – 11360A page 2 - 5
2. Safety Devices