Snorkel SRT2670 - Manual (Page 29)

■ Bubble Level (outrigger machines
only)
A bubble level is located on the platform side rail,
below the platform control box. Watch the bubble
level while you set the outriggers. Lower the outrig-
gers, one at a time, just enough to center the bubble
in the circle on top of the gauge. When the bubble is
centered the platform is level and can safely be
raised.
■ Coolant
The engine coolant reservoir is mounted on the
front of the engine tray. When the engine is at oper-
ating temperature the coolant should be at the HOT
line. When the engine is cold there should be about
one inch (2.54 cm) of coolant in the bottom of the
reservoir.
SRT2670 – 11360A page 4 - 3
4. Gauges