Lull 1044C-54 Series II Service Manual User Manual

Page 331

Transmission

31200079

8-7

Fig. 8-5: Disconnect the Battery Negative (-) Cable

7. Thoroughly clean the transmission and surrounding area, including all

hoses and fittings, before proceeding.

8. Place a suitable receptacle under the transmission drain plug. Remove

the transmission drain plug (2), and allow the transmission oil to drain
into the receptacle.

9. Transfer the used transmission oil into a suitable, covered container,

and label the container as “Used Oil.” Dispose of used oil at an
approved recycling facility. Clean and reinstall the transmission drain
plug.

Fig. 8-6: Drain Transmission Oil

10. Remove the engine-to-transmission drive shaft.

11. Remove the transmission-to-axle drive shafts.

12. Remove the hydraulic pump.

MV0190

MV0200