Lull 1044C-54 Series II Service Manual - Manual (Page 211)

Boom and Transfer
31200079 6-69
9. (Ref. Fig. 6-71) Remove upper front slide pads from middle (rear)
boom section as follows:
a. Remove two (2) each capscrews (Item 1), lockwashers (Item 2),
from front of middle (rear) boom section.
b. Remove two (2) slide pads (Item 4) and shims (Item 3).
Fig. 6-72: Upper Front Slide Pad Removal – Middle (Forward) Boom Section
10. (Ref. Fig. 6-72) Remove upper front slide pads from middle (front)
boom section as follows:
a. Remove two (2) capscrews (Item 1) and lockwashers (Item 2)
securing each of the two (2) upper slide pads to the front of the
middle (forward) boom section.
b. Remove two (2) slide pads (Item 4) and shims (Item 3).
Fig. 6-73: Upper Chain – Middle (Forward) to Middle (Rear) Boom Sections
J
1245
1
2
4
3
# Description
1 Button-Head Socket Capscrew
2 Lockwasher
# Description
3 Shim
4 Front Upper Slide Pad
0
80
60
40
20
-20
J
1223
1
2
3
4
# Description
1 Chain Adjustment Anchor
2 Jam Nut
# Description
3 Lockwasher
4 Nut