Lull 1044C-54 Series II Service Manual - Manual (Page 160)

Boom and Transfer
6-18 31200079
Front Carriage Tilt Cylinder
Description
Fig. 6-10: Front Carriage Tilt Cylinder
The front carriage tilt cylinder is located inside the inner boom section at
the front of the machine connecting to the inner boom and to the quick
attach assembly. It controls attachment tilt when the appropriate joystick
handle is activated. Maximum operating pressure is at approximately
3175 psi. Daily lubrication of the two grease fittings is required.
0
80
60 40
20
-20
J
1126