Lull 1044C-54 Series II Service Manual - Manual (Page 154)

Boom and Transfer
6-12 31200079
Boom Hoist Cylinder
Description
Fig. 6-7: Boom Hoist Cylinders
(Ref. Fig. 6-7) Two (2) boom hoist cylinders are used to raise and lower the
boom. They are attached on one end to the outer boom and the other end
is attached to the transfer carriage/boom cradle near the rear of the
operator’s compartment. Daily lubrication of the two grease fittings on
each cylinder is required.
0
80
60
40 20
-20
J
112
6
RE
V
. 001