Apple Logic Express 8 - Manual (Page 627)

Chapter 27 Bouncing Your Project 627
Defining the Bounce Range
Before bouncing, it is best to define a range of your project that you would like to bounce.
The default values for the Start and End position fields in the Bounce window will
encompass the entire Logic Express project if no regions are selected, or the Cycle
function is inactive.
 If the Cycle function is engaged, the bounce start and end positions will match the
locator positions.
 If a selection (of one or more regions) is made in the Arrange window, the bounce
start and end positions will match the selected area.
Note: You can manually set the bounce start and end positions in the Bounce window,
if none of the options above are appropriate.
Using the Bounce Window
Following the range definition, press the Bounce button on the output channel, or
choose File > Bounce. This will open the Bounce window.
Global Bounce Window Options
Several global options are available in the Bounce window, regardless of the file types
being bounced.