Apple Logic Express 8 - Manual (Page 222)

222 Chapter 10 Working With Instruments and Effects
To insert a software instrument, Audio Unit Generator, or MIDI controlled effect:
m Click the Instrument slot of an Instrument channel strip, and choose the desired
software instrument, Audio Unit Generator, or MIDI controlled effect (name and type)
from the Plug-in menu.
∏
Tip: You can simply choose an instrument name to insert the instrument in stereo on a
stereo format channel.
The plug-in window of the chosen instrument, effect, or generator is opened
automatically. If you do not want the plug-in window to open automatically after
insertion, turn off the “Open plug-in window on insertion” preference in the
Logic Express > Preferences > Audio > General tab.
You can adjust all plug-in parameters in the plug-in window. For further information
please read the section on “
Adjusting Plug-in Parameters ” on page 233.
To remove a plug-in:
m Click the desired Insert or Instrument slot, and choose No Plug-in from the menu.
To replace a plug-in:
m Click on the Insert slot, and browse to the desired plug-in type.