Apple Power Macintosh 7600/200 Series - Manual (Page 81)

Connecting most audio equipment
To connect most audio equipment, follow the steps below. For specific
instructions on connecting a microphone, skip to the next section,
“Connecting and Positioning a Microphone.”
1 Make sure that the audio equipment has a cable with a stereo miniplug connector or two
RCA-type connectors.
2 Place the audio equipment near the computer.
3 Shut down the computer and turn off the audio equipment.
4 Attach cables to the audio equipment following the instructions that came with
the equipment.
Some equipment (such as most headphones) comes with cables
already attached.
5 If your audio equipment is a sound input device such as a tape deck, audio CD player, or
VCR, attach it to either the sound input port or the left and right RCA input ports.
Connect cables that have a stereo miniplug to the sound input port (≈). If
you’re using a cable with two RCA-type connectors, connect it to the right and
left RCA input ports (-).
RCA RCA
Stereo miniplug Stereo miniplug
81 Connecting Additional Equipment