Apple Power Macintosh 7600/200 Series - Manual (Page 62)

4 Use the Current Zone pop-up menu (if available) to choose the zone you want.
If you don’t see a pop-up menu here, this setting has been locked or your
network is not set up to allow you to choose a zone. Zones are set up by the
network administrator.
5 Click the close box to close the AppleTalk control panel.
If you have made configuration changes, an alert box asks if you want to save
them. If you have changed the port, an alert box also tells you that the change
will interrupt any AppleTalk services that are established. This means that
your network services such as printers and e-mail may be temporarily
unavailable, and you may have to choose a printer and log on to your e-mail
again after saving changes.
6 To save your changes, click the Save button.
Your changes take effect immediately; you do not have to restart your computer.
Getting more information about the AppleTalk control panel
Macintosh Guide (or Mac OS Guide) contains information about additional
capabilities available in the AppleTalk control panel, such as:
m using configurations, a way to save different AppleTalk settings and switch
among them as desired—for example, if you use your computer with more
than one network
m using the User Mode command to change the availability of settings in the
AppleTalk control panel
m turning AppleTalk off in order to save RAM in your computer when you
are not using an AppleTalk network
For more information about these capabilities, click the h button in the
AppleTalk control panel.
62 Chapter 5