Apple Power Macintosh 7600/200 Series - Manual (Page 122)

6 If you need to remove one or more existing DRAM DIMMs to make room for new ones,
remove them now by following the illustration below.
IMPORTANT Do not touch the DIMM’s connectors. Handle the DIMM only by
the edges.
DRAM DIMM (Your DIMM’s shape and
components may vary.)
Ejector (Your slot may have
one or two ejectors.)
Connectors
While holding the DIMM along its side edges,
press down on the ejector(s) as shown. The
DIMM will be released from its slot, and you
can then pull the DIMM straight up and out
of the slot.
DRAM slot (1 of 8)
(Toward front of computer )
122 Chapter 8