Apple Power Macintosh 7600/200 Series - Manual (Page 11)

Connecting the mouse and keyboard
The way you connect the mouse and keyboard depends on whether the
keyboard has a built-in cable or a separate cable.
Connecting a keyboard with a built-in cable
1 Plug the mouse cable into the recessed port on the back of the keyboard.
The plug and the port are marked with the V icon (symbol). The positions of
the port and icon on your keyboard may be different from those pictured.
2 If the front or side of your monitor has a port marked with the
V
icon, plug the keyboard
cable into this port. Otherwise, plug the keyboard cable into the port marked with the
V
icon on the back of the computer.
This cable plugs into the Apple Desktop Bus (ADB) port,
marked with the
V icon, on the back of the computer.
Plug the mouse cable into the recessed port
on the keyboard. The flat part of the plug
should be pointing down, as shown here.
11 Setting Up Your Computer