Apple Power Macintosh 7600/200 Series - Manual (Page 59)

To connect your Macintosh to an Ethernet transceiver for other types of
Ethernet media:
1 Shut down your Macintosh.
2 Connect the Ethernet transceiver to the network following the instructions that came
with the transceiver.
3 Plug the transceiver cable from the Ethernet transceiver into the standard AUI port on
the Apple Ethernet AUI Adapter.
4 Plug the adapter’s power cord into an electrical power outlet.
5 Plug the connector on the Apple Ethernet AUI Adapter into the AAUI Ethernet port on
your Macintosh.
Next, see “Configuring Your Network Connection” later in this chapter for
information on configuring your network connection.
Electrical outlet
Apple Ethernet AUI Adapter
Ethernet port (AAUI)
Ethernet transceiver for other media
59 Connecting Your Computer to a Network