Apple Logic Express 7 - Manual (Page 15)

Chapter 1 Basics 15
When changing the Arrange track, an open Plug-in window will update to display the
corresponding slot’s plug-in on the newly-selected track. As an example, if the ES1 was
loaded on Audio Instrument channel 1, and an EXSP24 instance was loaded on Audio
Instrument channel 1, switching between these tracks would automatically update the
Plug-in window to show the ES1/EXSP24, respectively.
Bypass
The Bypass button allows a plug-in to be deactivated, but not removed from the insert/
instrument slot. You can also bypass the effect directly in the Audio Object by Option-
clicking on the corresponding insert slot.
Settings Menu (Arrow)
Clicking the Arrow to the right of the Bypass button accesses the Settings menu.
Further information on this can be found in “Plug-in Settings” on page 16.
Switching the Contents of the Plug-in Window
Y ou can reassign any open Plug-in window—in two different ways—via the two pull-
down menus to the right of the Settings menu (the Arrow):
• Use the upper pull-down menu ( Track 1 in the diagram) to switch the Plug-in
window between all channels that use the same plug-in. If you have inserted the
EVB3 on tracks 1 and 6, for example, you can switch between these channels and
adjust the parameters of each EVB3 instance, respectively.
• In the lower pull-down menu you can switch between the plug-in slots of the
selected channel. As an example, if a particular channel uses an Equalizer and an
EVB3 plug-in, you can switch the Plug-in window between these plug-ins.
001/ 011 Button
Some Logic plug-ins may have an additional 001/011 button next to the Link button.
Activate this button to reveal sliders for the extra parameters at the bottom of the Plug-
in window.