Apple Logic Express 7 - Manual (Page 119)

Chapter 19 EXSP24 119
Vienna Library
The EXSP24 features an additional interface for the Vienna Symphonic Library—
Performance Set. The Performance Tool software provided by VSL needs to be installed
to allow access to this interface. For details please refer to the VSL documentation.
Plug-in Window Parameters
Legato/Mono/Poly Buttons
These switches determine the number of voices used by the EXSP24:
• When Poly is selected, the maximum number of voices is set via the numeric field
alongside the Poly button. To change the value, click and hold with your mouse, and
drag up or down to increase/decrease polyphony.
• When Mono or Legato is selected, the EXSP24 is monophonic, and uses only one
voice.
• In Legato mode, Glide is only active on tied notes. Envelopes are not retriggered
when tied notes are played (single trigger).
In Mono mode, Glide is always active and the envelopes are retriggered by every note
played (multi trigger).
Voices
This parameter determines the number of voices (polyphony) that the EXSP24 is
supposed to play. The used field indicates the number of voices that are actually used. If
both fields tend to show the same value most of the time (probably causing a
noticeable number of samples to drop out), you should set a higher voices value.