Apple Macintosh PowerBook 190 Series - Manual (Page 57)

Using eWorld with a PC Card modem
Follow these steps when using eWorld with a PC Card modem. You can also
use these steps as a guideline for setting up other communications programs
to use the Communications Toolbox.
Note: The files listed below were designed to work with the United States
phone system. These files may or may not work properly outside of the
United States.
To select the correct modem file for your PC Card modem, follow these steps:
1 Insert your PC Card modem.
2 Open the eWorld application program.
3 Click the Edit Local Setup button.
4 Select the port that your PC Card modem is in.
You should see either upper or lower PC Card slot listed. If you don’t, make
sure your modem is properly inserted.
5 Choose your modem from the Modem Type pop-up menu.
If your PC Card modem is not listed, try Generic Modem or Hayes Basic.
If that doesn’t work, you may need to create a new modem type. (See the
eWorld Help topic “Creating a New Modem Type.”)
47 Using Expansion Bay Modules and PC Cards
Choose your
modem here.
Choose the card slot
that your modem is
inserted in. If you
ever use the PC Card
modem in the other
slot, you need to
reselect the correct
port in this menu.