Using expansion bay modules and pc cards – Apple Macintosh PowerBook 190 Series User Manual
Page 47
37
Read this chapter for information on
using expansion bay modules
and PC Cards.
Using expansion bay modules
The floppy disk drive in your Macintosh PowerBook is a removable module,
which you can easily switch with other types of removable modules. The
place in your computer where modules go is called the expansion bay. All
expansion bay modules are inserted and removed in the same way.
You should not remove an expansion bay module if there is a floppy disk (or
other storage medium) inserted and in use or you may lose data. When the
small green in-use light on the side of the module lights up, the floppy disk
(or other medium) inserted in the module is in use. Before removing the
module, you must first close any files and quit any programs using the floppy
disk, then drag the disk to the Trash or choose Put Away from the File menu.
Removing an expansion bay module
To remove an expansion bay module from your Macintosh PowerBook, follow
these steps:
1
Close any files and quit any application programs or files that are using the floppy disk
(or other medium), if any is inserted.
Remember to save your work.
3
Using Expansion Bay Modules and PC Cards